Miraflake Random Broadcast is a decorative seamless epoxy flooring system with vinyl chips broadcast into it. Miraflake Random Broadcast consists of a primer, opaque or pigmented epoxy receiving coat, broadcast colored vinyl chips and a clear urethane topcoat. Miraflake Random Broadcast is available in standard colored chips and patterns (see the Miraflake Random Color Card). Custom mixes can be field created using standard solid colors.
Vinyl chips are sparsely broadcast into Miracote CQ receiving coat based on desired end look. The chips can be broadcast from a range of a few random chips per square foot into a pigmented receiving coat to complete chip coverage, which can be broadcast into a clear opaque (Miracote CQ Clear) or pigmented (Miracote CQ Pigmented) epoxy receiving coat.
Mirathane APU Clear aliphatic polyester urethane topcoat(s) lock the vinyl chips in place. One to two topcoats are designed to hold the vinyl chips in place. Miraflake Random Broadcast is more economical than Miraflake Full Broadcast. One topcoat will leave an aggressive skid resistant finish, however it will be more difficult to clean. Two topcoats will make the system smoother, providing a less resistant floor, but will be easier to clean.
Miraflake is available with an EPA Listed Anti-Microbial Biocide in the epoxy receiving coat only. Incorporating an anti-microbial in the epoxy systems, which protects against growth of algae, bacteria, fungi, mold, mildew, yeast, etc.
Where to Use
-Light vehicular traffic areas, such as home garages and auto show rooms
-Commercial areas, such as retail stores and restaurants (not kitchens);
-Institutional buildings, such as schools and churches.
-Produces a rapidly installed, decorative seamless floor at a moderate cost.
-Monolithic. Can incorporate integral cove base, which helps to eliminate unsanitary dirt build-up and microbial growth.
-Resistant to many chemicals.
-Skid-resistant - An array of skid-resistant surface textures available.
-Optional Waterproof Membrane for fluid-proofing suspended floors.
-Compressive Strength ASTM D695 9,000 psi
(Resin Components)
-Tensile Strength ASTM D638 4,400 psi
(Resin components)
-Elongation ASTM D638 19.6%
(Resin Components)
-Surface Hardness ASTM D2240 Shore D 75 to 80
-Indentation Characteristics
(Steadily Applied Load) MIL-D-3134, Para. 4.7.4.2.1
0.005" indent (2,000 lbs on a 1" steel ram imposed
for 30 mins concrete substrate)
-Indentation Characteristics Passes
(Impacted Load) MIL-D-3134, Para. 4.7.3
0.011" indent (2 lb. steel ball dropped from 8-ft. height)
-Adhesion ASTM D4541 > 400 psi
-Water Absorption MIL-D-3134 Less than 1%
-Abrasion Resistance ASTM C501 19 Wear Index
(H-22 Wheel)
-Microbial Resistance ASTM G21 Passes Testing 1
- Classrooms
- School Cafeterias and Kitchens
- Media Centers
- Laboratories
- Bottling Lines
- Mixing Lines
- Bakeries and Dairies
- Meat Packing Areas
- Kitchens
- Coolers
- Wineries
- Emergency Rooms
- Clean Rooms
- Patient Rooms
- Hospital Cafeterias
- Mechanical Rooms
- Assembly Lines
- Control Rooms
- Plant Cafeterias
- Kitchens and Bathrooms
- Garage Floors
- Supermarkets
- Restuarants
- Lobbies
- Shopping Malls
- Automobile Dealerships
- Stadium Concessions
Downloads
Bookmark This Page
Print This Page
Email This Page