Miraflake Full Broadcast is a decorative seamless epoxy flooring system with vinyl chips broadcast into it. Miraflake Full Broadcast consists of a primer, opaque or pigmented epoxy receiving coat, broadcast colored vinyl chips and a clear epoxy or urethane topcoat. Miraflake Full Broadcast is available in standard colored chips and patterns (see the Miraflake Color Card). Custom mixes can be field created using standard solid colors.
Vinyl chips can be broadcast into Miraflake Full Broadcast receiving coat based on desired end look. The chips can be broadcast from a range of a few random chips per square foot into a pigmented receiving coat to complete chip coverage, which can be broadcast into a clear opaque or pigmented epoxy receiving coat.
The top coat(s) lock the vinyl chips in place. One to two topcoats are designed to hold the vinyl chips in place. One epoxy or urethane lock coat is more economical and will leave an aggressive skid resistant finish, however it will be more difficult to clean. Two topcoats will make the system smoother, providing a less resistant floor, but will be easier to clean.
Miraflake Full Broadcast is available with an EPA Listed Anti-Microbial Biocide, which protects against growth of algae, bacteria, fungi, mold, mildew, yeast, etc.
Where to Use
• Home garages
• Auto show rooms
• Retail stores
• Restaurants (not kitchens)
• Schools
• Churches
Product Technical Data Sheet
-Produces a rapidly installed, decorative seamless floor at a moderate cost.
-Monolithic. Can incorporate integral cove base, which helps to eliminate unsanitary dirt build-up and microbial growth.
-Resistant to many chemicals.
-Skid-resistant - An array of skid-resistant surface textures available.
-Optional Waterproof Membrane for fluid-proofing suspended floors.
-Compressive Strength ASTM D695 9,000 psi
(Resin Components)
-Tensile Strength ASTM D638 4,400 psi
(Resin components)
-Elongation ASTM D638 19.6%
(Resin components)
-Surface Hardness ASTM D2240 Shore D 75 to 80
-Indentation Characteristics
(Steadily Applied Load) MIL-D-3134, Para. 4.7.4.2.1
0.005" indent (2,000 lbs. on a 1" steel ram imposed for
30 mins concrete substrate)
-Indentation Characteristics Passes
(Impacted Load) MIL-D-3134, Para. 4.7.3
0.011" indent (2 lb. steel ball dropped from 8-ft height)
-Adhesion ASTM D4541 >400 psi
-Water Absorption MIL-D-3134 Less than 1%
-Abrasion Resistance ASTM C501 19 Wear Index
(H-22 Wheel)
-Microbial Resistance ASTM G21 Passes Testing 1
- Classrooms
- School Cafeterias and Kitchens
- Media Centers
- Laboratories
- Bottling Lines
- Mixing Lines
- Bakeries and Dairies
- Meat Packing Areas
- Kitchens
- Coolers
- Wineries
- Emergency Rooms
- Clean Rooms
- Patient Rooms
- Hospital Cafeterias
- Mechanical Rooms
- Assembly Lines
- Control Rooms
- Plant Cafeterias
- Kitchens and Bathrooms
- Garage Floors
- Supermarkets
- Restuarants
- Lobbies
- Shopping Malls
- Automobile Dealerships
- Stadium Concessions
Downloads
Bookmark This Page
Print This Page
Email This Page