CQ Clear Epoxy Pigmented Thin-Film Coating can be applied smooth or as a moderate skid resistant epoxy coating over concrete or Miracote composite floors, as well as stairs, ramps and other surfaces requiring an epoxy coating system.
CQ Clear Epoxy Pigmented Thin-Film Coating is a Scientifically Superior three component coating system consisting of CQ Clear Epoxy and hardener, and ColorPax-E (epoxy pigment pack). The three components are mixed together, squeegeed and back rolled. CQ Clear Epoxy Pigmented systems are available in popular, but limited, range of standard colors.
For moderate skid resistance, a forth component, Miracote Synthetic Aggregate, can be added.
It can be finished with optional topcoats of clear (gloss) or matte finish, Mirathane APU 100 (Aliphatic Polyester Urethane), which are chemical, abrasion and UV stable or topcoated with CR-N Topcoat when subjected to extremely harsh chemical exposure or Glazetop a highly chemical and abrasion resistant polyurea topcoat.
CQ Clear Epoxy Pigmented Systems are available with an EPA Listed Anti-Microbial Biocide, which protects against growth of algae, bacteria, fungi, mold, mildew, yeast, etc.
Where to Use
The intended use ranges from dry to wet environments in commercial, industrial and institutional areas, such as manufacturing, processing, warehousing, stairs, ramps, walkways, corridors and commons-areas. The material can be applied over new or existing concrete or Miracote composition floors or metal or wood sub-surfaces (Consult Crossfield for detailed specification for metal or wood surfaces).
In addition, CQ Clear Epoxy Pigmented Scientifically Superior systems include: Slurry coat; Slurry coat Broadcast; Single Broadcast and Double Broadcast.
-Virtually free of VOC.
-Can be applied over a wide range of surfaces.
-No significant odor during installation.
-Resists most common chemical spillage.
-Profile selection from smooth to moderately aggressive.
-Crossfield offers a Limited Supplemental Warranty of ten years against moisture vapor suppression disbondment of CQ Clear Epoxy Pigmented Systems when used over MVERS II Primer. Contact Crossfield for additional information.
-Compressive Strength ASTM D695 ..................................... 12,000psi (Resin & Hardener) .............................................................. 907 kg/cm2
-Tensile Strength ASTM D638 ............................................... 4,400 psi
(Resin & Hardener) .............................................................. 310 kg/cm2
-Tensile Elongation ASTM D638 ............................................ 4,400 psi (Resin & Hardener) .............................................................. 310 kg/cm2
-Surface Hardness ASTM D2240 Shore D .................................. 75-80
-Indentation Characteristics (Steadily Applied Load) MIL-D-3134 ......................................... 0.005" Para 4.7.4.2.1, 2000 lbs on ..................................................... 0.127 mm 1" steel ram imposed for 30 minutes over a concrete substrate, indented.
-Indentation Characteristics MIL-D-3134, Para 4.7.3. (Impact Load) ............................................................. 0.011" (2 lb. .908 kg) Indent from steel ball ........................................ 0.28 mm dropped twice from 8 ft. height
-Adhesion ASTM D4541 .......................................................... >400 psi (100% failure in concrete) .................................................... 28.1 kg/cm
-Water Absorption MIL-D-3134 ................................................ <1.0%
-Abrasion Resistance ASTM D4060 (CS17, 1000gr load, 1000 cycles) ............................................... 0.09 gr
-Flammability ASTM D635 .................................... Self-Extinguishing Bonded to Concrete
-VOC ............................................................................................... 3 g/L
- School Cafeterias and Kitchens
- Media Centers
- School Locker Rooms and Restrooms
- Laboratories
- Bottling Lines
- Mixing Lines
- Bakeries and Dairies
- Meat Packing Areas
- Kitchens
- Coolers
- Wineries
- Emergency Rooms
- Clean Rooms
- Patient Rooms
- Hospital Cafeterias
- Mechanical Rooms
- Assembly Lines
- Loading Docks
- Control Rooms
- Chemical Storage Areas
- Plant Locker and Shower Rooms
- Plant Cafeterias
- Kitchens and Bathrooms
- Garage Floors
- Supermarkets
- Restuarants
- Lobbies
- Shopping Malls
- Automobile Dealerships
- Stadium Concessions
Downloads
Bookmark This Page
Print This Page
Email This Page