Find a Rep
Email Us
Distributor Login
Your email:
Password:
Request a Quote
Contractor Access
Email This Page
Your email:
Your friend’s email:
Add to Materials

N

Name

Action
CQ Clear Epoxy Colored Quartz Broadcast Flooring System
CQ Clear Epoxy Colored Quartz Broadcast Flooring is a thin section flooring system designed for use where a durable, monolithic floor with decorative value is required. Available in one, two or three broadcast and recover options, the completed floor is approximately 1/16" (1.59mm) to 1/8" (3.18mm) thick. Consists of colored quartz granules embedded in a Miracote‟s CQ Clear Epoxy resin. It is resistant to hydrocarbon greases, food greases and fats and a range of chemicals.
CQ Clear Epoxy Colored Quartz Broadcast Flooring can be applied over concrete sub-surfaces. Consult Crossfield Products Corp. office for specification or technical assistance when required over other substrates.

Special Colored Quartz aggregate granules are available in nine colors (gray, blue, white, black, brown, buff, tan, green and red). These aggregates are be mixed to make any color combination, which the above colors can produce. Eighteen standard aggregate blends are available and featured on the Miracote CQ Color chart.

CQ Clear Epoxy Colored Quartz Broadcast Flooring is available with an EPA Listed Anti-Microbial Biocide, which protects against growth of algae, bacteria, fungi, mold, mildew, yeast, etc.

In areas of high moisture emissivity, Miracote MVERS is to be specified. Alternative topcoats include Miracote Glazetop and Mirathane.

Where to Use
Floors in front of houses, large public foyers, main lobbies, halls, passageways, laboratories, toilet rooms, food service, betting and stadium concessions and public areas, and in many institutional service environments.

-Virtually free of VOC

-Produces a rapidly installed, decorative seamless floor at a moderate cost.

-Monolithic. Can incorporate integral cove base. Eliminates unsanitary build-up of bacteria.

-Resistant to many chemicals. See Chemical Resistant Table.

-Skid-resistant - An array of skid-resistant surface textures available.

-Maintenance - built to take repeated scrubbings.

-Waterproof Membrane optional for waterproofing suspended floors.

-Compressive Strength ASTM C579 .................................... 10,000 psi
(Resin, Hardener & Aggregate) ........................................... 738 kg/cm2
-Compressive Strength ASTM D695 ................................... 12,000 psi
(Resin & Hardener) .............................................................. 907 kg/cm2

-Tensile Strength ASTM C307 ............................................... 1,800 psi (Resin, Hardener & Aggregate) .......................................... 127 kg/cm2

-Tensile Strength ASTM D638 ............................................... 4,400 psi (Resin & Hardener) .............................................................. 310 kg/cm2

-Flexural Strength ASTM C580 ............................................. 4,000 psi (Resin, Hardener & Aggregate) ........................................... 281 kg/cm2

-Surface Hardness ASTM D2240 Shore D .................................. 80-85

-Pencil Hardness............................................................3H

-Indentation Characteristics ...................................................... 0.005"
(Steadily Applied Load) MIL-D-3134, .................................. 0.127mm Para. 4.7.4.2.1, 2000 lbs on 1" steel ram imposed for 30 minutes over a concrete substrate, indented

-Indentation Characteristics ...................................................... 0.011"
(Impact Load) MIL-D-3134, Para. 4.7.3 ................................. 0.28 mm
(2 lb. 908 kg) Indent from steel ball Dropped twice from 8 ft height

-Adhesion ASTM D4541 .......................................................... >400 psi
(100% failure in concrete) ................................................... 28.1 kg/cm2

-Water Absorption MIL-D-3134 ................................................ <1.0%

-Abrasion Resistance ASTM D4060 ......................................... 0.09 gr
(CS17, 1000gr load, 1000 cycles)

-Flammability ASTM D635 .................................... Self-Extinguishing Bonded to Concrete

-VOC ............................................................................................... 3 g/L

-Skid Resistance
Varies depending upon surface texture selected (See Crossfield Skid Resistance Characteristic)

-Microbial Resistant ASTM G21 ................................. Passes Rating 1

-Chemical Resistant ........................... (see Chemical Resistance Chart)

  • Classrooms
  • School Cafeterias and Kitchens
  • Media Centers
  • School Locker Rooms and Restrooms
  • Laboratories
  • Bottling Lines
  • Mixing Lines
  • Bakeries and Dairies
  • Meat Packing Areas
  • Kitchens
  • Coolers
  • Wineries
  • Emergency Rooms
  • Clean Rooms
  • Patient Rooms
  • Hospital Cafeterias
  • Mechanical Rooms
  • Assembly Lines
  • Loading Docks
  • Control Rooms
  • Chemical Storage Areas
  • Plant Locker and Shower Rooms
  • Plant Cafeterias
  • Kitchens and Bathrooms
  • Garage Floors
  • Supermarkets
  • Restuarants
  • Lobbies
  • Shopping Malls
  • Automobile Dealerships
  • Stadium Concessions
Quick Links
  Downloads
  Bookmark This Page
  Print This Page
  Email This Page
  Request Quote