MiraStamp

Miracote MiraStamp base-coat is a polymer modified, two- component cementitious, thin-stamped overlay applied in conjunction with color, stains and sealers to produce decorative Architectural paving finishes. MiraStamp has very high compressions strength and is suited for continued exposure to commercial vehicular and pedestrian traffic. The system consists of a wet primer application, base-coat latex-modified mortar pigmented with Miracote ColorPax LIP, MiraStamp LR(Liquid Release), Miracote Mirastain, and Miracote protective clear sealers and topcoats. Available sealers are designed for various conditions and traffic. Most all available stamps can be used with the MiraStamp system with little or no modification to traditional stamping techniques used to produce a number of attractive patterns. MiraStamp Architectural paving system is installed as a 1/4″ to 5/8″ decorative overlayment.

Where to Use
Interior/Exterior applications – Restaurants – Pedestrian and Vehicular traffic surfaces – Courtyards – Driveways – Pedestrian Bridges – Balconies – Pool Decks – Lobbies – Entryways/Foyers – Plaza Decks – Theme Parks – Breezeways

Technical Data:
Product Technical Data Sheet
Installation Guide
Care & Maintenance
CSI

Brochure:
MiraStamp

SDS:
Liquid
Powder

Advantages

  • Freeze-Thaw Resistant: water retardancy prevents cold weather scaling
  • Simple to use: Pre-Portioned mixing
  • Polymer-Fortified: Self curing and superior adhesion
  • LEED (Leadership in Energy and Environmental Design) Credit eligible
  • Available in standard and custom colors
  • High Compressive Strength
  • Eliminates the need for concrete removal
  • Low maintenance cost

Technical Info

  • Compressive Strength ASTM C109……………………………….4,200 psi
  • Indentation Characteristics (Steadily Applied Load)………………..2.26%
  • MIL-D-3134, Para. 4.7.4.2.1 (2,000 lbs. on 1″ steel Ram imposed for 30 mins.)
  • Adhesion MIL-D-3134, Para. 4.7.14…………………………………..305 psi (Shear from steel plate after 96 hours)
  • Water Absorption MIL-D-3134…………………………………….3.41%
  • Tensile Strength ASTM C190……………………………………..925 psi
  • Flexural Strength ASTM C580…………………………………….2,415 psi
  • Impact Resistance (Gardner Impact Tester)………………..No chipping, Cracking or delamination and not more than 0.014″

Applications

  • Pool Decks
  • Kitchens and Bathrooms
  • Driveways
  • Patios and Balconies
  • Garage Floors
  • Supermarkets
  • Restaurants
  • Lobbies
  • Shopping Malls
  • Automobile Dealerships
  • Stadium Concessions