Miracote Chameleon Epoxy Resin is a thin film plural component epoxy resin used to create all the Chameleon effects. MCER is mix as desired with ColorPax-E, special Chameleon Series of Colors, Chameleon Metallic's, Pearl or Color-shifts, in infinite combinations, to create desired artistic surface finishes. The Chameleon Decorative Systems can be applied on to Concrete, Miracote Microtopping DP, Miracote Multipurpose Coating, self leveling, trowel or squeegee grades of underlayment, and the many other Miracote overlay materials or systems. Crossfield File Code Mir.376 07 15 2009 Page 1 of 2
Chameleon Epoxy Chameleon Epoxy Resin adds value, durability, and ease of maintenance. Chameleon Epoxy Resin is designed for use where long-lasting monolithic protection of decorative substrates is required. The completed system, 2 coats at approximately 6-8 mils each can perform as a stand-alone application over concrete, or can be applied in conjunction with Miracote Mirathane APU 100 topcoats when the advantages of a urethane topcoat are desired.
Miracote Chameleon Epoxy Resin can be applied over prepared concrete substrates or approved Miracote Systems. Consult any Crossfield Products Corp. office for specification or technical assistance.
Where to Use:
Chameleon Epoxy Resin is designed for Institutional, Commercial and Retail sanitary looking flooring areas. Typical applications include food preparation, laboratories, toilet rooms, food service, clinical sites, pet care, garage floors, etc. to protect the substrate concrete or decorative applications from medium to heavy duty use.
Product Technical Data Sheet
-Produces a rapidly installed, decorative seamless floor coating at a moderate cost.
-Monolithic. Can incorporate an integral cove base. Eliminates unsanitary build-up of bacteria.
-Resistant to many chemicals, including brake fluid, gasoline, many acids solutions and other reagents. See Chemical Resistant Guide for specific details.
-Slip-Resistant - An array of slip-resistant surface textures available.
-Maintenance - Built to take repeated scrubbings.
Compressive Strength ASTM D695............................12,900 psi
Surface Hardness ASTM D2240 Durometer (Shore "D").......................................85
Indentation Characteristics
(Steadily Applied Load) MIL-D-3134, Para. 4.7.4.2.1 0.005" indent (2,000 lbs. on a 1" steel ram imposed 30 minutes. Concrete substrate)
Indentation Characteristics
(Impacted Load) MIL-D-3134, Para. 4.7.3 (2 lb. steel ball 0.011" indent dropped from 8-ft height)
Adhesion..........................................................................345 psi
ACI Committee 403 (Bulletin Title No. 59-43, pp. 1139-1149 (100% failure in concrete)
Water Absorption MIL-D-3134............................Less than 1%
Abrasion Resistance ASTM C501 ((H-22 Wheel) ..........................19 Wear Index
Tensile Strength ASTM D638.....................................4,400 psi (Resin Components)
Elongation ASTM D638....................................................19.6% (Resin Components)
Slip Resistance ...........................Varies depending upon surface texture selected
- Kitchens and Bathrooms
- Garage Floors
- Supermarkets
- Restuarants
- Lobbies
- Shopping Malls
- Automobile Dealerships
Downloads
Bookmark This Page
Print This Page
Email This Page